Servo Mitsubishi MR-J2 Junior

Servo-Mitsubishi-MR-J2-Junior

The unique servo system for micro applications using the latest in servo technology operating at 24 VDC input with: patented Real-Time Adaptive Tuning RS-232C serial interface for Windows based set-up ( MR-Configurator) speed, positioning, and torque modes low acoustic noise and a built-in parameter unit. The MR-J2-JR supports the following control methods: Position, Speed, Torque, SSCNET Network, Built-In Motion, and RS-485 Multi Drop.

 

Specifications and Configuration

The ultimate servo system using the latest in servo technology operating at 24VDC input with: patented Real-Time Adaptive Tuning; RS-232C serial interface for Windows based set-up speed, positioning, and torque modes; low acoustic noise and a built-in parameter unit.

 

MR-J2-Spec.jpg

 

A. MR-J2-JR Servomotors
B. MR-J2-JR Amplifiers
C. Cables
D. Software
E. System Options

 

MR-J2-JR Servomotors

Servomotor Selection

 

MR-J2-JR-Servomotors.jpg

 

Specification

 

Model Number

HC-AQ0135

HC-AQ0235

HC-AQ0335

Stocked Item

S (Non-B only)

Continuous Characteristics (*1, *2)

Rated Output

kW

0.01

0.02

0.03

Rated Torque

N•m (oz•in)

0.0318 (4.503)

0.0637 (9.021)

0.0955 (13.524)

Rated Speed (*1)

r/min

3000

Maximum Speed

r/min

5000

4500

Instantaneous Permissible Speed

r/min

5750

5175

Maximum Torque

N•m (oz•in)

0.0955 (13.524)

0.191 (27.048)

0.287 (40.643)

Power at Continuous Rated Torque

kW/s

2.0

5.6

9.7

Inertia Moment (*4)

J [x 10⁴ kg•m²]

0.0050

0.0072

0.0094

WK² [oz•in²]

0.027

0.039

0.051

Recommended Ratio of Load Inertia Moment to Servomotor Shaft Inertia Moment

30 times or less

Power Supply Capacity

Refer to “Power supply capacity and generated loss of servo amplifier” in the Servo Amplifier Instruction Manual

Rated Current (Maximum Current) (A)

2.4 (7.7)

2.4 (7.7)

2.3 (7.4)

Speed/Position Detector

Encoder (resolution: 8192 pulses/rev)

Accessory

Encoder

Insulation Class

Class B

Structure

Totally-enclosed self-cooling (protection type: IP55 (*6))

Environmental Conditions (*5)

Refer to Section 2.1 in the Servomotor Instruction Manual

Weight kg (lb) (*3)

0.19 (0.419)

0.22 (0.485)

0.25 (0.551)

Notes:

  1. When the power supply voltage drops, we cannot guarantee the output and rated speed.
  2. 80% ED at low noise. 80% ED: Indicates the condition in which operation time at read torque accounts for 80% and the other no load time accounts for 20% in a single operation cycle.
  3. When the servomotor is equipped with reduction gear or electromagnetic brake, refer to the corresponding outline dimension drawing. For the EN Standard and UL/cUL Standard compliant models, please contact Mitsubishi.
  4. If the load inertia moment ratio exceeds the indicated value, please contact Mitsubishi.
  5. When the equipment is to be used in places where it is subjected to oil and/or water, such as on machine field sites, optional features apply to the equipment.
  6. Except for the shaft-through portion and connector end.

 

MR-J2-JR Amplifiers

Amplifier Selection

MR-J2-JR-Amplifiers.jpg

 

Model Number

MR-J2-03A5

MR-J2-03B5

MR-J2-03C5

Stocked Item

S

Circuit Power Supply (Note)

Voltage

21.6 to 30VDC (instantaneous permissible voltage 34V)

Power Supply Capacity

HC-AQ0135D

Continuous 0.8A, Max. 2.4A

HC-AQ0235D

Continuous 1.6A, Max. 4.8A

HC-AQ0335D

Continuous 2.4A, Max. 7.2A

Control Circuit Power Supply (Note)

24VDC+10% 200mA (400mA when using the servomotor equipped with electromagnetic brake)

System

Sine-wave PWM control, current control system

Dynamic Brake

Built-in

Protective Functions

Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off, (electronic thermal relay), servomotor overheat protection, encoder fault protection, undervoltage, instantaneous power failure protection, overspeed protection, excessive error protection

Speed Frequency Response

250Hz or more

Structure

Open (IP00)

Environment

Ambient Temperature

Operation

°C (°F)

0 to +55 (non-freezing) (32 to +131 (non-freezing))

Storage

°C (°F)

-20 to +65 (non-freezing) (-4 to +149 (non-freezing))

Ambient Humidity

Operation (Storage)

90%RH or less (non-condensing)

Atmosphere

Indoors (no direct sunlight), Free from corrosive gas, flammable gas, oil mist, dust and dirt

Altitude

Max. 1000m (3280 ft) above sea level

Vibration

m/s² (ft/s²)

5.9 or less (19.4 or less)

Weight

kg (lb)

0.2 (0.44)

Note: To comply with the low voltage directive, use a reinforced insulation stabilizing power supply.